7 details to compare when two roof estimates are far apart

By Madi Oleno · November 20, 2026
7 details to compare when two roof estimates are far apart

When two roof estimates differ sharply, compare what each contractor will build before comparing the total. A price difference can come from different measurements, materials, preparation, or assumptions about hidden work. The lower price may represent a smaller scope; the higher one may include something your house does not need.

For a Golden-area project, make a copy of each estimate and mark these seven details. Request written answers where a line is missing. You should be able to explain the price difference without relying on “better quality” as the whole answer.

1. The roof areas included in the price

Confirm that both estimates cover the same structures and roof sections. A garage, porch, low-slope addition, or detached building can disappear inside a vague description such as “replace roof.” Ask for a diagram that marks included and excluded areas.

The home's floor area is not a complete roof measurement. Request the measured roof area, the material quantity, and an explanation of the allowance for cuts and waste. Different roof shapes can require different amounts of material even when the measured areas are similar.

Also check how each bid handles an attached lower roof. If one contractor includes it and another assumes it will remain, the totals are answering different questions. Resolve that difference before negotiating the price.

2. Removal and disposal

Ask how many existing layers the contractor expects to remove and what happens if additional layers are discovered. The estimate should describe the removal scope and the method for pricing an unexpected condition.

Confirm disposal, delivery, and site cleanup responsibilities. If the dumpster needs a particular location or temporary access arrangement, make that part of the discussion before work starts. A narrow driveway or shared access can affect how the project is organized.

Compare the same approach on both bids. If one proposes removing the existing covering and the other proposes leaving material in place, ask each contractor to explain suitability, inspection access, and applicable requirements. The price alone cannot answer those questions.

3. Decking assumptions and change orders

Roof decking is the wood surface beneath the roofing system. Its full condition may be unclear until the old covering is removed. GAF's guide to damaged roof sheathing describes replacement of deteriorated decking as part of addressing the affected area.

Look for the quantity included, the unit used to measure additional work, and what that unit price covers. A price per sheet is difficult to compare with a price per square foot until the assumptions are clear.

Ask how photographs, quantities, and your approval will be recorded. “Extra as needed” is an incomplete budgeting answer. You need to know who contacts you and how the roof will be protected while a decision is pending.

4. The actual roof system

Compare the manufacturer and product line, along with the underlayment, starter, ridge components, and relevant accessories. “Architectural shingles” leaves room for different products. A color name also does not identify an entire roofing system.

Ask why the selected components suit each roof section. GAF's low-slope shingle bulletin shows why roof slope can change installation requirements. A shallow porch deserves its own material decision.

Keep upgrades visible as separate options. That lets you compare the base project first and decide whether a particular material or appearance change earns its added cost. Ask for current product documents when performance is part of the sales discussion.

5. Flashing and ventilation work

Have each contractor list which flashing will be replaced, retained, or inspected after tear-off. Flashing directs water at roof joints and penetrations. A reroof price can change substantially depending on how the contractor handles difficult roof-to-wall or chimney details.

For ventilation, request the planned intake and exhaust arrangement and any related work outside the roof surface. Do not assume that “new ridge vent” includes clearing an obstructed intake path or correcting an attic problem.

A simple comparison table helps:

Item Estimate A Estimate B
Roof-to-wall flashing Replace, retain, or excluded? Replace, retain, or excluded?
Pipe and vent flashings Exact scope Exact scope
Intake and exhaust Product and related work Product and related work
Uncertain conditions How decided and priced? How decided and priced?

6. Permits, inspection, and completion records

Confirm the building department responsible for your property and who handles required permits and inspections. A Golden mailing address is not enough to establish that the property is inside city limits. Jefferson County provides an address lookup through its Building Safety page for unincorporated properties.

Ask what records you receive when the work is complete. Include the final scope, approved changes, inspection result where applicable, and the exact warranty documents offered with your project.

A manufacturer warranty and a contractor's workmanship promise may cover different things. Compare the actual documents and eligibility requirements. A large year count in a sales presentation does not explain the remedy for every future problem.

7. Your total obligation and decision points

Write down the base price, selected options, known exclusions, and the method for handling additional work. If financing is offered, request the separate credit terms and compare total cost as well as the monthly payment. Keep the construction price identifiable.

For a self-funded project, ask which repairs are necessary now and which proposed improvements can be considered separately. For an insurance-related project, have your insurer explain coverage and payment questions; do not treat a contractor's estimate as a coverage decision.

Send both contractors the same clarification request: “Please confirm the roof areas, removal, decking allowance, product system, flashing, ventilation, permits, exclusions, and change-order process included in this price.”

Request a written roof replacement scope from PRQ Exteriors and use the same seven categories to review it. Compare the revised scopes once the unanswered items are filled in.

← Back to all posts