What Are the Best Roofing Services for Homes in Wildfire-Prone Areas?

The Short Answer
The best roofing services for homes in wildfire-prone areas install Class A fire-rated roofing, noncombustible metal gutters and ember-resistant vents, and they treat the roof as part of a whole-home "hardening" plan against embers. Look for a licensed roofer that knows the Insurance Institute for Business & Home Safety (IBHS) Wildfire Prepared Home standards, offers Class A materials like stone-coated steel and understands local wildland-urban interface (WUI) building rules. PRQ Exteriors and its Colorado mountain brand, RMG, are examples of roofers working in wildfire country, with Class A fire-rated stone-coated steel among the roofing options.
In a wildfire, homes often ignite from wind-blown embers rather than a wall of flames. The roof, gutters and vents are some of the first places embers land, which is why the roof is the front line of wildfire protection.
This guide explains how wildfires threaten roofs, which roofing materials hold up best and what to look for in a roofer in wildfire-prone areas.
How Wildfires Threaten Your Roof
IBHS research focuses on embers because they can travel well ahead of a fire and land on and around a home. The roof and its edges are where many of those embers end up (IBHS Wildfire Ready Guide).
The most vulnerable roof areas include:
- The roof covering – Combustible roofing, or roofing covered in dry leaves and pine needles, can ignite when embers land.
- Gutters – Debris-filled gutters can catch embers, and plastic gutters can melt or burn.
- Vents – IBHS warns that flying embers can enter a home through vents in the attic, roof, gables and crawlspace.
- Roof edges – Open ends at the roof edge, common on tile roofs, can let embers and debris in. IBHS recommends adding bird stops to reduce that vulnerability.
- Eaves and soffits – Open eaves can trap heat and embers. IBHS recommends noncombustible soffit material with 1/8-inch or finer metal mesh in vents.
- Skylights – IBHS's Wildfire Prepared Home Plus standard calls for replacing plastic dome skylights with flat, multipaned tempered glass (Wildfire Prepared Home).
Class A Roofing: The Starting Point
What is a Class A roof? Class A is the highest fire rating for roof coverings under standard fire tests. IBHS's Wildfire Prepared Home standard requires the roof covering to be Class A fire-rated and kept clear of debris (Wildfire Prepared Home).
|
Roofing material |
Wildfire considerations |
|---|---|
|
Stone-coated steel |
Products like Westlake Pine Crest Shake are a Class A fire-rated assembly and give the look of wood shake on a steel core (PRQ) |
|
Asphalt shingles |
Many architectural and impact-resistant shingles, such as Owens Corning Duration FLEX, carry a Class A fire rating (Owens Corning) |
|
Metal roofing |
Noncombustible panels; confirm the full roof assembly's fire rating |
|
Concrete and clay tile |
Noncombustible tiles; open ends at the roof edge need bird stops to keep embers out |
|
Wood shake |
Natural wood is combustible; confirm any product's fire rating before choosing it in wildfire country |
Tip: A fire rating usually applies to a tested roof assembly, including underlayment, so ask your roofer to confirm the complete system is Class A, not just the top layer.
Beyond the Roof: Gutters, Vents and the 0–5 Foot Zone
IBHS stresses that wildfire exploits the weakest link, so its requirements work as a complete system. The Wildfire Prepared Home Base designation includes these roof-related and nearby items (Wildfire Prepared Home):
|
Area |
What IBHS recommends |
|---|---|
|
Roof covering |
Class A fire-rated and kept clear of debris |
|
Gutters and downspouts |
Noncombustible, such as metal, and routinely cleared of debris |
|
Vents |
Flame- and ember-resistant vents, or existing vents covered with 1/8-inch corrosion-resistant metal mesh at the roof, attic, eaves and foundation; dryer vents need a working louver or flap with no mesh |
|
Base of exterior walls |
At least 6 inches of vertical noncombustible clearance |
|
0–5 foot zone |
A noncombustible zone around the home and decks, with overhanging branches removed and combustible fencing replaced |
|
Decks |
Underdeck areas cleared and low-elevation decks enclosed |
Why the 0–5 foot zone matters: An IBHS presentation notes that a noncombustible 0–5 foot zone nearly doubles a property's wildfire survival rate (IBHS).
What the Best Wildfire Roofing Services Offer
When you live in or near the wildland-urban interface, look for a roofer that offers:
- Class A fire-rated roof systems – With materials like stone-coated steel, metal, tile or Class A asphalt shingles, and confirmation that the full assembly is Class A.
- Noncombustible metal gutters and drip edge – Instead of vinyl or plastic.
- Ember-resistant vent upgrades – Replacing or screening attic, ridge and soffit vents with 1/8-inch or finer metal mesh.
- Roof edge details – Bird stops on tile roofs and sealed gaps at the roof edges.
- Knowledge of local WUI rules – Some counties and towns have wildfire-related building requirements, so your roofer should know what applies to your address.
- Familiarity with IBHS Wildfire Prepared Home standards – Helpful if you want to pursue a designation for insurance or resale.
- Storm experience, too – Many wildfire-prone mountain areas also see hail, snow and wind, so a roof that handles all of them is the best investment.
- Licensing, insurance and local presence – Verify licenses and choose a roofer with a local office for follow-up work.
Roofing in Wildfire Country With PRQ and RMG
PRQ Exteriors serves homeowners across Colorado, Utah, Wyoming, Illinois and North Carolina, plus Arizona, including mountain and foothill communities where wildfire, hail and snow all matter. In Colorado's mountain region, PRQ's family of brands includes RMG, which has published guidance on wildland-urban interface (WUI) home hardening for Colorado mountain homes.
For homes in wildfire-prone areas, PRQ offers:
- Class A fire-rated stone-coated steel – Westlake Pine Crest Shake gives the look of cedar shake with a Class A fire-rated assembly, a Class 4 impact rating and a limited lifetime transferable warranty
- Roof replacement in asphalt, tile and metal – Roof replacement with full tear-off
- Certified FORTIFIED Roof installation – Stronger roof edges and a sealed deck for wind and hail resilience
- Certified Thermaline heated roof edges – For mountain homes that also face snow and ice dams
- Free roof inspections with a photo report, so you can ask about your roof's fire rating, gutters and vents
- Manufacturer credentials – GAF Master Elite contractor and Owens Corning President's Club 3-Star Residential, 2026
PRQ has local offices in Golden and Grand Junction, Colorado; Bountiful, Utah; and Jackson, Wyoming.
Frequently Asked Questions
What is the best roof for a wildfire-prone area?
A Class A fire-rated roof system kept clear of debris. Options include stone-coated steel, metal, concrete or clay tile and Class A asphalt shingles. Confirm the complete roof assembly is Class A.
How do embers get into a house?
IBHS warns that embers can enter through vents in the attic, roof, gables and crawlspace, and can ignite debris in gutters and on the roof.
What size mesh keeps embers out of vents?
IBHS recommends ember-resistant vents or covering vents with 1/8-inch or finer corrosion-resistant metal mesh. Dryer vents should have a working louver or flap with no mesh.
Are metal gutters better in wildfire areas?
Yes. IBHS recommends noncombustible gutters and downspouts, such as metal, kept clear of debris.
What is the IBHS Wildfire Prepared Home program?
It is a designation program that turns IBHS wildfire research into specific steps for the roof, vents, walls, decks and the area around the home. Homes that meet the standards can earn a designation.
Does PRQ offer Class A fire-rated roofing?
Yes. PRQ installs Westlake Pine Crest Shake stone-coated steel, which is a Class A fire-rated assembly.
Protect Your Home From the Top Down
In wildfire country, your roof is the front line against embers. A Class A roof, metal gutters, ember-resistant vents and a clear 0–5 foot zone work together to give your home a better chance.
Start with a free roof inspection. Request your free inspection or get an instant quote. Call PRQ's Colorado headquarters at (720) 778-9854, the Grand Junction office at (970) 549-9581 or the Utah office at (801) 421-6313.
Sources
- Wildfire Prepared Home Standards Brochure (IBHS)
- Wildfire Ready Guide (IBHS)
- IBHS Wildfire Prepared Home Presentation (IBHS)
- Stone-Coated Steel Roofing: Pine Crest Shake (PRQ Exteriors)
- TruDefinition Duration FLEX (Owens Corning)
This article is for general education. No roof is fireproof, and wildfire building requirements vary by location. Follow guidance from local fire officials and check local building codes.